stm32g0xx-runtimes v15.0.1 (#1808)
This commit is contained in:
Daniel King
GitHub
@@ -0,0 +1,145 @@
|
||||
name = "embedded_stm32g0xx"
|
||||
description = "embedded runtime for the STM32G0xx SoC"
|
||||
version = "15.0.1"
|
||||
|
||||
long-description = """
|
||||
## Usage
|
||||
|
||||
First edit your `alire.toml` file and add the following elements:
|
||||
- Add `embedded_stm32g0xx` in the dependency list:
|
||||
```toml
|
||||
[[depends-on]]
|
||||
embedded_stm32g0xx = "*"
|
||||
```
|
||||
- if applicable, apply any runtime configuration variables (see below).
|
||||
|
||||
Then edit your project file to add the following elements:
|
||||
- "with" the run-time project files. With this, gprbuild will compile the run-time before your application
|
||||
```ada
|
||||
with "runtime_build.gpr";
|
||||
with "ravenscar_build.gpr";
|
||||
```
|
||||
- Specify the `Target` and `Runtime` attributes:
|
||||
```ada
|
||||
for Target use runtime_build'Target;
|
||||
for Runtime ("Ada") use runtime_build'Runtime ("Ada");
|
||||
```
|
||||
- specify the `Linker` switches:
|
||||
```ada
|
||||
package Linker is
|
||||
for Switches ("Ada") use Runtime_Build.Linker_Switches;
|
||||
end Linker;
|
||||
```
|
||||
|
||||
The runtime is configurable via Alire crate configuration variables.
|
||||
See the project website for full details of the available options.
|
||||
|
||||
By default, the runtime is configured for the STM32G0B1RE. If your board has
|
||||
a different MCU, then you will need to specify which MCU you are using via
|
||||
the crate configuration. For example, to configure the runtime for the
|
||||
STM32G031J4, add the following to your `alire.toml`:
|
||||
```toml
|
||||
[configuration.values]
|
||||
embedded_stm32g0xx.MCU_Sub_Family = "G031"
|
||||
embedded_stm32g0xx.MCU_Flash_Memory_Size = "4"
|
||||
```
|
||||
|
||||
By default, the runtime configures the clock tree for a 64 MHz system clock
|
||||
from the high-speed internal (HSI) oscillator. If you want a different clock
|
||||
configuration, then use the crate configuration variables to specify the
|
||||
configuration you wish to use. For example, to configure the runtime to
|
||||
generate a 64 MHz system clock from a 24 MHz HSE crystal oscillator:
|
||||
```toml
|
||||
[configuration.values]
|
||||
# Configure a 24 MHz HSE crystal oscillator
|
||||
light_tasking_stm32g0xx.HSE_Clock_Frequency = 24000000
|
||||
light_tasking_stm32g0xx.HSE_Bypass = false
|
||||
|
||||
# Select PLLRCLK as the SYSCLK source
|
||||
light_tasking_stm32g0xx.SYSCLK_Src = "PLLRCLK"
|
||||
|
||||
# Configure the PLL VCO to run at 128 MHz from the 24 MHz HSE (fVCO = fHSE * (N/M))
|
||||
light_tasking_stm32g0xx.PLL_Src = "HSE"
|
||||
light_tasking_stm32g0xx.PLL_N_Mul = 10
|
||||
light_tasking_stm32g0xx.PLL_M_Div = 2
|
||||
|
||||
# Configure the PLLRCLK to run at 64 MHz from the 128 MHz VCO.
|
||||
light_tasking_stm32g0xx.PLL_R_Div = 2
|
||||
|
||||
# Configure the AHB an APB to also run at 64 MHz
|
||||
light_tasking_stm32g0xx.AHB_Pre = "DIV1"
|
||||
light_tasking_stm32g0xx.APB_Pre = "DIV1"
|
||||
```
|
||||
|
||||
The runtime will generate a compile time error when an invalid PLL configuration
|
||||
is set.
|
||||
|
||||
By default the PLL's Q and P clocks are enabled. If you don't need them, then you
|
||||
can disable them via the crate configuration:
|
||||
```toml
|
||||
[configuration.values]
|
||||
embedded_stm32g0xx.PLL_Q_Enable = false
|
||||
embedded_stm32g0xx.PLL_P_Enable = false
|
||||
```
|
||||
|
||||
The runtime will enable the PLL only when either `PLL_Q_Enable` or `PLL_P_Enable`
|
||||
is `true`, or when `SYSCLK_Src = "PLLRCLK"`.
|
||||
|
||||
The interrupt stack sizes are also configurable:
|
||||
```toml
|
||||
[configuration.values]
|
||||
embedded_stm32g0xx.Interrupt_Stack_Size = 1024
|
||||
embedded_stm32g0xx.Interrupt_Secondary_Stack_Size = 128
|
||||
```
|
||||
"""
|
||||
|
||||
authors = ["AdaCore", "Daniel King"]
|
||||
maintainers = ["Daniel King <damaki.gh@gmail.com>"]
|
||||
maintainers-logins = ["damaki"]
|
||||
licenses = "GPL-3.0-or-later WITH GCC-exception-3.1"
|
||||
tags = ["embedded", "runtime", "stm32g0"]
|
||||
website = "https://github.com/damaki/stm32g0xx-runtimes"
|
||||
|
||||
project-files = ['runtime_build.gpr', 'ravenscar_build.gpr']
|
||||
|
||||
[configuration]
|
||||
generate_c = false
|
||||
output_dir = "gnat_user"
|
||||
|
||||
[configuration.variables]
|
||||
MCU_Sub_Family = { type = "Enum", values = ["G030", "G031", "G041", "G050", "G051", "G061", "G070", "G071", "G081", "G0B0", "G0B1", "G0C1"], default = "G0B1" }
|
||||
MCU_Flash_Memory_Size = { type = "String", default = "B" }
|
||||
|
||||
RAM_Parity_Check = { type = "Enum", values = ["Disabled", "Enabled"], default = "Disabled" }
|
||||
|
||||
LSI_Enabled = { type = "Boolean", default = true }
|
||||
LSE_Enabled = { type = "Boolean", default = false }
|
||||
LSE_Bypass = { type = "Boolean", default = false }
|
||||
HSE_Bypass = { type = "Boolean", default = false }
|
||||
HSE_Clock_Frequency = { type = "Integer", first = 1, last = 48000000, default = 8000000 }
|
||||
PLL_Src = { type = "Enum", values = ["HSE", "HSI16"], default = "HSI16" }
|
||||
PLL_M_Div = { type = "Integer", first = 1, last = 8, default = 2 }
|
||||
PLL_N_Mul = { type = "Integer", first = 8, last = 86, default = 16 }
|
||||
PLL_R_Div = { type = "Integer", first = 2, last = 8, default = 2 }
|
||||
PLL_Q_Div = { type = "Integer", first = 2, last = 8, default = 2 }
|
||||
PLL_P_Div = { type = "Integer", first = 2, last = 32, default = 2 }
|
||||
PLL_Q_Enable = { type = "Boolean", default = true }
|
||||
PLL_P_Enable = { type = "Boolean", default = true }
|
||||
HSI_Div = { type = "Enum", values = ["DIV1", "DIV2", "DIV4", "DIV8", "DIV16", "DIV32", "DIV64", "DIV128"], default = "DIV1" }
|
||||
SYSCLK_Src = { type = "Enum", values = ["LSE", "LSI", "HSE", "PLLRCLK", "HSISYS"], default = "PLLRCLK" }
|
||||
AHB_Pre = { type = "Enum", values = ["DIV1", "DIV2", "DIV4", "DIV8", "DIV16", "DIV64", "DIV128", "DIV256", "DIV512"], default = "DIV1" }
|
||||
APB_Pre = { type = "Enum", values = ["DIV1", "DIV2", "DIV4", "DIV8", "DIV16"], default = "DIV1" }
|
||||
|
||||
Interrupt_Stack_Size = { type = "Integer", first = 1, default = 1024 }
|
||||
Interrupt_Secondary_Stack_Size = { type = "Integer", first = 1, default = 128 }
|
||||
|
||||
[[depends-on]]
|
||||
gnat_arm_elf = "^15"
|
||||
|
||||
[origin]
|
||||
hashes = [
|
||||
"sha256:a63f533d4b4f15bdd78253dca1bba6e719943d1ccd6df9c09a00a00ae6400fcb",
|
||||
"sha512:e73216fc1bc0c21957ab2adf77b4c63eea8301802334a9c2379238ff8c7959c86690caa62bb324540a14fda8efc2139a7a3836bc0c4b1d86073a6009b3df3f24",
|
||||
]
|
||||
url = "https://github.com/damaki/stm32g0xx-runtimes/releases/download/v15.0.1/embedded-stm32g0xx-15.0.1.tar.gz"
|
||||
|
||||
@@ -0,0 +1,144 @@
|
||||
name = "light_stm32g0xx"
|
||||
description = "light runtime for the STM32G0xx SoC"
|
||||
version = "15.0.1"
|
||||
|
||||
long-description = """
|
||||
## Usage
|
||||
|
||||
First edit your `alire.toml` file and add the following elements:
|
||||
- Add `light_stm32g0xx` in the dependency list:
|
||||
```toml
|
||||
[[depends-on]]
|
||||
light_stm32g0xx = "*"
|
||||
```
|
||||
- if applicable, apply any runtime configuration variables (see below).
|
||||
|
||||
Then edit your project file to add the following elements:
|
||||
- "with" the run-time project files. With this, gprbuild will compile the run-time before your application
|
||||
```ada
|
||||
with "runtime_build.gpr";
|
||||
```
|
||||
- Specify the `Target` and `Runtime` attributes:
|
||||
```ada
|
||||
for Target use runtime_build'Target;
|
||||
for Runtime ("Ada") use runtime_build'Runtime ("Ada");
|
||||
```
|
||||
- specify the `Linker` switches:
|
||||
```ada
|
||||
package Linker is
|
||||
for Switches ("Ada") use Runtime_Build.Linker_Switches;
|
||||
end Linker;
|
||||
```
|
||||
|
||||
The runtime is configurable via Alire crate configuration variables.
|
||||
See the project website for full details of the available options.
|
||||
|
||||
By default, the runtime is configured for the STM32G0B1RE. If your board has
|
||||
a different MCU, then you will need to specify which MCU you are using via
|
||||
the crate configuration. For example, to configure the runtime for the
|
||||
STM32G031J4, add the following to your `alire.toml`:
|
||||
```toml
|
||||
[configuration.values]
|
||||
light_stm32g0xx.MCU_Sub_Family = "G031"
|
||||
light_stm32g0xx.MCU_Flash_Memory_Size = "4"
|
||||
```
|
||||
|
||||
By default, the runtime configures the clock tree for a 64 MHz system clock
|
||||
from the high-speed internal (HSI) oscillator. If you want a different clock
|
||||
configuration, then use the crate configuration variables to specify the
|
||||
configuration you wish to use. For example, to configure the runtime to
|
||||
generate a 64 MHz system clock from a 24 MHz HSE crystal oscillator:
|
||||
```toml
|
||||
[configuration.values]
|
||||
# Configure a 24 MHz HSE crystal oscillator
|
||||
light_tasking_stm32g0xx.HSE_Clock_Frequency = 24000000
|
||||
light_tasking_stm32g0xx.HSE_Bypass = false
|
||||
|
||||
# Select PLLRCLK as the SYSCLK source
|
||||
light_tasking_stm32g0xx.SYSCLK_Src = "PLLRCLK"
|
||||
|
||||
# Configure the PLL VCO to run at 128 MHz from the 24 MHz HSE (fVCO = fHSE * (N/M))
|
||||
light_tasking_stm32g0xx.PLL_Src = "HSE"
|
||||
light_tasking_stm32g0xx.PLL_N_Mul = 10
|
||||
light_tasking_stm32g0xx.PLL_M_Div = 2
|
||||
|
||||
# Configure the PLLRCLK to run at 64 MHz from the 128 MHz VCO.
|
||||
light_tasking_stm32g0xx.PLL_R_Div = 2
|
||||
|
||||
# Configure the AHB an APB to also run at 64 MHz
|
||||
light_tasking_stm32g0xx.AHB_Pre = "DIV1"
|
||||
light_tasking_stm32g0xx.APB_Pre = "DIV1"
|
||||
```
|
||||
|
||||
The runtime will generate a compile time error when an invalid PLL configuration
|
||||
is set.
|
||||
|
||||
By default the PLL's Q and P clocks are enabled. If you don't need them, then you
|
||||
can disable them via the crate configuration:
|
||||
```toml
|
||||
[configuration.values]
|
||||
light_stm32g0xx.PLL_Q_Enable = false
|
||||
light_stm32g0xx.PLL_P_Enable = false
|
||||
```
|
||||
|
||||
The runtime will enable the PLL only when either `PLL_Q_Enable` or `PLL_P_Enable`
|
||||
is `true`, or when `SYSCLK_Src = "PLLRCLK"`.
|
||||
|
||||
The interrupt stack sizes are also configurable:
|
||||
```toml
|
||||
[configuration.values]
|
||||
light_stm32g0xx.Interrupt_Stack_Size = 1024
|
||||
light_stm32g0xx.Interrupt_Secondary_Stack_Size = 128
|
||||
```
|
||||
"""
|
||||
|
||||
authors = ["AdaCore", "Daniel King"]
|
||||
maintainers = ["Daniel King <damaki.gh@gmail.com>"]
|
||||
maintainers-logins = ["damaki"]
|
||||
licenses = "GPL-3.0-or-later WITH GCC-exception-3.1"
|
||||
tags = ["embedded", "runtime", "stm32g0"]
|
||||
website = "https://github.com/damaki/stm32g0xx-runtimes"
|
||||
|
||||
project-files = ['runtime_build.gpr']
|
||||
|
||||
[configuration]
|
||||
generate_c = false
|
||||
output_dir = "gnat_user"
|
||||
|
||||
[configuration.variables]
|
||||
MCU_Sub_Family = { type = "Enum", values = ["G030", "G031", "G041", "G050", "G051", "G061", "G070", "G071", "G081", "G0B0", "G0B1", "G0C1"], default = "G0B1" }
|
||||
MCU_Flash_Memory_Size = { type = "String", default = "B" }
|
||||
|
||||
RAM_Parity_Check = { type = "Enum", values = ["Disabled", "Enabled"], default = "Disabled" }
|
||||
|
||||
LSI_Enabled = { type = "Boolean", default = true }
|
||||
LSE_Enabled = { type = "Boolean", default = false }
|
||||
LSE_Bypass = { type = "Boolean", default = false }
|
||||
HSE_Bypass = { type = "Boolean", default = false }
|
||||
HSE_Clock_Frequency = { type = "Integer", first = 1, last = 48000000, default = 8000000 }
|
||||
PLL_Src = { type = "Enum", values = ["HSE", "HSI16"], default = "HSI16" }
|
||||
PLL_M_Div = { type = "Integer", first = 1, last = 8, default = 2 }
|
||||
PLL_N_Mul = { type = "Integer", first = 8, last = 86, default = 16 }
|
||||
PLL_R_Div = { type = "Integer", first = 2, last = 8, default = 2 }
|
||||
PLL_Q_Div = { type = "Integer", first = 2, last = 8, default = 2 }
|
||||
PLL_P_Div = { type = "Integer", first = 2, last = 32, default = 2 }
|
||||
PLL_Q_Enable = { type = "Boolean", default = true }
|
||||
PLL_P_Enable = { type = "Boolean", default = true }
|
||||
HSI_Div = { type = "Enum", values = ["DIV1", "DIV2", "DIV4", "DIV8", "DIV16", "DIV32", "DIV64", "DIV128"], default = "DIV1" }
|
||||
SYSCLK_Src = { type = "Enum", values = ["LSE", "LSI", "HSE", "PLLRCLK", "HSISYS"], default = "PLLRCLK" }
|
||||
AHB_Pre = { type = "Enum", values = ["DIV1", "DIV2", "DIV4", "DIV8", "DIV16", "DIV64", "DIV128", "DIV256", "DIV512"], default = "DIV1" }
|
||||
APB_Pre = { type = "Enum", values = ["DIV1", "DIV2", "DIV4", "DIV8", "DIV16"], default = "DIV1" }
|
||||
|
||||
Interrupt_Stack_Size = { type = "Integer", first = 1, default = 1024 }
|
||||
Interrupt_Secondary_Stack_Size = { type = "Integer", first = 1, default = 128 }
|
||||
|
||||
[[depends-on]]
|
||||
gnat_arm_elf = "^15"
|
||||
|
||||
[origin]
|
||||
hashes = [
|
||||
"sha256:3a171ab0bb5724f07e62a2b681749a4ed1e8f51189b353d862b61f12d6a62a8a",
|
||||
"sha512:c4c65012ed7725c6a6ddf7650bcfe15e487bd90157c50a180c9f00ec53d1d0ba9e4944410c0443d180aba587a80d1c61e039de2afab603ea35566aea71dc6ffd",
|
||||
]
|
||||
url = "https://github.com/damaki/stm32g0xx-runtimes/releases/download/v15.0.1/light-stm32g0xx-15.0.1.tar.gz"
|
||||
|
||||
@@ -0,0 +1,145 @@
|
||||
name = "light_tasking_stm32g0xx"
|
||||
description = "light-tasking runtime for the STM32G0xx SoC"
|
||||
version = "15.0.1"
|
||||
|
||||
long-description = """
|
||||
## Usage
|
||||
|
||||
First edit your `alire.toml` file and add the following elements:
|
||||
- Add `light_tasking_stm32g0xx` in the dependency list:
|
||||
```toml
|
||||
[[depends-on]]
|
||||
light_tasking_stm32g0xx = "*"
|
||||
```
|
||||
- if applicable, apply any runtime configuration variables (see below).
|
||||
|
||||
Then edit your project file to add the following elements:
|
||||
- "with" the run-time project files. With this, gprbuild will compile the run-time before your application
|
||||
```ada
|
||||
with "runtime_build.gpr";
|
||||
with "ravenscar_build.gpr";
|
||||
```
|
||||
- Specify the `Target` and `Runtime` attributes:
|
||||
```ada
|
||||
for Target use runtime_build'Target;
|
||||
for Runtime ("Ada") use runtime_build'Runtime ("Ada");
|
||||
```
|
||||
- specify the `Linker` switches:
|
||||
```ada
|
||||
package Linker is
|
||||
for Switches ("Ada") use Runtime_Build.Linker_Switches;
|
||||
end Linker;
|
||||
```
|
||||
|
||||
The runtime is configurable via Alire crate configuration variables.
|
||||
See the project website for full details of the available options.
|
||||
|
||||
By default, the runtime is configured for the STM32G0B1RE. If your board has
|
||||
a different MCU, then you will need to specify which MCU you are using via
|
||||
the crate configuration. For example, to configure the runtime for the
|
||||
STM32G031J4, add the following to your `alire.toml`:
|
||||
```toml
|
||||
[configuration.values]
|
||||
light_tasking_stm32g0xx.MCU_Sub_Family = "G031"
|
||||
light_tasking_stm32g0xx.MCU_Flash_Memory_Size = "4"
|
||||
```
|
||||
|
||||
By default, the runtime configures the clock tree for a 64 MHz system clock
|
||||
from the high-speed internal (HSI) oscillator. If you want a different clock
|
||||
configuration, then use the crate configuration variables to specify the
|
||||
configuration you wish to use. For example, to configure the runtime to
|
||||
generate a 64 MHz system clock from a 24 MHz HSE crystal oscillator:
|
||||
```toml
|
||||
[configuration.values]
|
||||
# Configure a 24 MHz HSE crystal oscillator
|
||||
light_tasking_stm32g0xx.HSE_Clock_Frequency = 24000000
|
||||
light_tasking_stm32g0xx.HSE_Bypass = false
|
||||
|
||||
# Select PLLRCLK as the SYSCLK source
|
||||
light_tasking_stm32g0xx.SYSCLK_Src = "PLLRCLK"
|
||||
|
||||
# Configure the PLL VCO to run at 128 MHz from the 24 MHz HSE (fVCO = fHSE * (N/M))
|
||||
light_tasking_stm32g0xx.PLL_Src = "HSE"
|
||||
light_tasking_stm32g0xx.PLL_N_Mul = 10
|
||||
light_tasking_stm32g0xx.PLL_M_Div = 2
|
||||
|
||||
# Configure the PLLRCLK to run at 64 MHz from the 128 MHz VCO.
|
||||
light_tasking_stm32g0xx.PLL_R_Div = 2
|
||||
|
||||
# Configure the AHB an APB to also run at 64 MHz
|
||||
light_tasking_stm32g0xx.AHB_Pre = "DIV1"
|
||||
light_tasking_stm32g0xx.APB_Pre = "DIV1"
|
||||
```
|
||||
|
||||
The runtime will generate a compile time error when an invalid PLL configuration
|
||||
is set.
|
||||
|
||||
By default the PLL's Q and P clocks are enabled. If you don't need them, then you
|
||||
can disable them via the crate configuration:
|
||||
```toml
|
||||
[configuration.values]
|
||||
light_tasking_stm32g0xx.PLL_Q_Enable = false
|
||||
light_tasking_stm32g0xx.PLL_P_Enable = false
|
||||
```
|
||||
|
||||
The runtime will enable the PLL only when either `PLL_Q_Enable` or `PLL_P_Enable`
|
||||
is `true`, or when `SYSCLK_Src = "PLLRCLK"`.
|
||||
|
||||
The interrupt stack sizes are also configurable:
|
||||
```toml
|
||||
[configuration.values]
|
||||
light_tasking_stm32g0xx.Interrupt_Stack_Size = 1024
|
||||
light_tasking_stm32g0xx.Interrupt_Secondary_Stack_Size = 128
|
||||
```
|
||||
"""
|
||||
|
||||
authors = ["AdaCore", "Daniel King"]
|
||||
maintainers = ["Daniel King <damaki.gh@gmail.com>"]
|
||||
maintainers-logins = ["damaki"]
|
||||
licenses = "GPL-3.0-or-later WITH GCC-exception-3.1"
|
||||
tags = ["embedded", "runtime", "stm32g0"]
|
||||
website = "https://github.com/damaki/stm32g0xx-runtimes"
|
||||
|
||||
project-files = ['runtime_build.gpr', 'ravenscar_build.gpr']
|
||||
|
||||
[configuration]
|
||||
generate_c = false
|
||||
output_dir = "gnat_user"
|
||||
|
||||
[configuration.variables]
|
||||
MCU_Sub_Family = { type = "Enum", values = ["G030", "G031", "G041", "G050", "G051", "G061", "G070", "G071", "G081", "G0B0", "G0B1", "G0C1"], default = "G0B1" }
|
||||
MCU_Flash_Memory_Size = { type = "String", default = "B" }
|
||||
|
||||
RAM_Parity_Check = { type = "Enum", values = ["Disabled", "Enabled"], default = "Disabled" }
|
||||
|
||||
LSI_Enabled = { type = "Boolean", default = true }
|
||||
LSE_Enabled = { type = "Boolean", default = false }
|
||||
LSE_Bypass = { type = "Boolean", default = false }
|
||||
HSE_Bypass = { type = "Boolean", default = false }
|
||||
HSE_Clock_Frequency = { type = "Integer", first = 1, last = 48000000, default = 8000000 }
|
||||
PLL_Src = { type = "Enum", values = ["HSE", "HSI16"], default = "HSI16" }
|
||||
PLL_M_Div = { type = "Integer", first = 1, last = 8, default = 2 }
|
||||
PLL_N_Mul = { type = "Integer", first = 8, last = 86, default = 16 }
|
||||
PLL_R_Div = { type = "Integer", first = 2, last = 8, default = 2 }
|
||||
PLL_Q_Div = { type = "Integer", first = 2, last = 8, default = 2 }
|
||||
PLL_P_Div = { type = "Integer", first = 2, last = 32, default = 2 }
|
||||
PLL_Q_Enable = { type = "Boolean", default = true }
|
||||
PLL_P_Enable = { type = "Boolean", default = true }
|
||||
HSI_Div = { type = "Enum", values = ["DIV1", "DIV2", "DIV4", "DIV8", "DIV16", "DIV32", "DIV64", "DIV128"], default = "DIV1" }
|
||||
SYSCLK_Src = { type = "Enum", values = ["LSE", "LSI", "HSE", "PLLRCLK", "HSISYS"], default = "PLLRCLK" }
|
||||
AHB_Pre = { type = "Enum", values = ["DIV1", "DIV2", "DIV4", "DIV8", "DIV16", "DIV64", "DIV128", "DIV256", "DIV512"], default = "DIV1" }
|
||||
APB_Pre = { type = "Enum", values = ["DIV1", "DIV2", "DIV4", "DIV8", "DIV16"], default = "DIV1" }
|
||||
|
||||
Interrupt_Stack_Size = { type = "Integer", first = 1, default = 1024 }
|
||||
Interrupt_Secondary_Stack_Size = { type = "Integer", first = 1, default = 128 }
|
||||
|
||||
[[depends-on]]
|
||||
gnat_arm_elf = "^15"
|
||||
|
||||
[origin]
|
||||
hashes = [
|
||||
"sha256:b916029ef717d3dc1099ceed8857ae48f57e112a8567978e6c5c3a835f86667d",
|
||||
"sha512:a395f1da6501d872cdeecdd9ef5dd986d312dbf3dc8942460a76a4cbf3d89b8934a1cc338cfc12308f76330138edee5874e51f147355b919f5bdf4549e07586e",
|
||||
]
|
||||
url = "https://github.com/damaki/stm32g0xx-runtimes/releases/download/v15.0.1/light-tasking-stm32g0xx-15.0.1.tar.gz"
|
||||
|
||||
Reference in New Issue
Block a user